New ventures and entrepreneurship Essay Example | Topics and Well Written Essays - 3500 words

New pursuits and business - Essay Example Figuring a dream is, surely, a business challenge on the grounds that occasionally business visionaries ought to change themselves into performers. Larger part of individuals are open to the current pioneering approaches, yet it is an entrepreneur’s duty to envision and foresee what's to come. A business person ought to consistently stay two or three strides in front of improvement to abstain from getting unimportant (Birley and Muzyka, 2000:45). It is likewise the obligation of a business visionary to fit advanced plans and thoughts into the present, and to make answers for others’ issues. Generally creative, pioneering adventures over the most recent four decades were imagined well before they became real factors. For instance, for Apple CEO Steve Jobs needed each to have a PC while Bill Gates needed to create easy to use programming for PCs. These dreams permitted Gates to turn into the most extravagant individual on the planet while Jobs turned into the most unmista kable business character of the 21st century.Sourcing CapitalHaving built up a sound strategic agreement, the following test includes bringing capital up in request to help the production of the new pursuit. Just business people have an astounding comprehension of business thoughts. Endeavoring to snag financial specialists into thoughts that are just acceptable on paper is an extremely enormous test for all business people. Endeavoring to persuade them that they are equipped for actualising the thought and being dependable is amazingly testing, particularly in new pursuits (Chandra, 2013:34).

growaw Edna Pontellier’s Search for Self in Kate Chopins The Awakening :: Chopin Awakening Essays

The Search for Self in The Awakening  In The Awakening, by Kate Chopin, Edna Pontellier is a hitched lady with youngsters. Anyway huge numbers of her activities appear those of a kid. Truth be told, Edna Pontelliers’ life is an incongruity, in that her adolescence permits her to develop. All through this novel, there are numerous instances of this on the grounds that Edna is ceaselessly looking for herself in the novel.   One case of how Edna⠡â ¦s adolescence permits her to develop is the point at which she begins to cry when LeÆ'Vonce, her better half, says she is anything but a decent mother.  ¡Ã‚ §He rebuked his significant other with her heedlessness, her routine disregard of the youngsters. In the event that it was anything but a mother⠡â ¦s spot to take care of youngsters, whose on earth was it?⠡â ¨(13). Edna, rather than revealing to her significant other that she had dealt with her kids, started to sob hysterically after her better half condemned her.  ¡Ã‚ §Mrs. Pontellier was at that point altogether conscious. She started to cry a little ¡Kshe push her face, steaming and wet, into the twist of her arm, and she continued crying there, not caring any more drawn out to dry her face, her eyes, her arms,⠡â ¨(13,14). These tears made Edna look as though she was as yet a youngster and that she is worn out on being treated as a kid by her better half. These tears likewise gave her she didn't care for where she was, an indication of development. Her tears represent her first arousing.   In spite of the fact that the following morning, after Edna had cried the prior night needed to proceed to bid farewell to her better half since he was leaving on an excursion for work. Edna acted youthfully around him again when he gave her a large portion of the cash he won the prior night.  ¡Ã‚ §Ã‚ ¡Ã‚ ¥It will purchase an attractive wedding present for Sister Janet!⠡â ¦ she shouted, streamlining the bills as she tallied them one by one,⠡â ¨(15). Edna is ruined by every last bit of her spouses cash.   Another case of how Edna⠡â ¦s youthfulness permits her to develop is when Edna swam like a child when she swam just because, and she had over assessed her capacity.  ¡Ã‚ §Once she turned and looked toward the shore, around the individuals she had left there. She had not gone any incredible distance ¡Kshe made no notice of her experience with death and her blaze of fear, but to state to her significant other,  ¡Ã‚ ¥I figured I ought to have died out there alone.

Nationals!

Nationals! Roughly a week ago, on a Thursday morning, at the crack of dawn, I found myself, along with 15 groggy teammates and five coaches, at Logan airport, awaiting the plane that would take us to Minneapolis en route to Waverly, Iowa, home to Wartburg College and the NCAA Division III Cross-Country Championships. As you may recall from where Maggie left off, our womens team qualified for nationals after placing fourth in New England, while the mens team qualified with a decisive victory. It was less than a week later we found ourselves, at 6:30AM, at the beginning of the end, ready to make the trip wed been preparing for all season. A plane ride and a time zone change later, we found ourselves in Minneapolis: There was snow! Were definitely not in Boston anymore After a three hour drive, we made it to Waverly, just in time to check out the course before the sun set. (Im going to refrain from the obvious commentary on the drive through Iowa-I come from a state that is also occasionally the butt of jokes so I wont go there. Except to say that the radio station we were listening to on our drive down was calledKOWZ.) Thursday night, the team enjoyed a meal at that most venerable of restaurants, the Olive Garden(there is something about the Olive Garden that draws cross-country teams like moths to a flame. Perhaps its because theyve colonized all but the farthest reaches of our nation, inescapable no matter where we travel to. In any case, Ive been to my fair share over the years). Claire 14 and Logan 13 await their pre-race pasta. On Friday we went to the course again, just to give it another going over. This time we made time for a photo op: The ladies at the course on Friday. In case you cant tell, it was pretty cold. Friday night brought the NCAA DIII XC banquet. It gave us an excuse to get all dressed up: The ladies, always classy. The guys. Apparently their outfits were the subject of quite the debate-this is in direct opposition to my previous claim. In any case, I have to say the grey sweaters turned out well. And then, it was Saturday. Meet day! While the craziness (like Maggie talked about at regionals, only MORE) went on around us, and the guys team raced (they got 12th! first New England team!): This is some serious dedication-remember how i said it was COLD? We stayed inside and tried to stay calm: Chilling, or as close as we could get to it, before the race. This was it. I mean, this was IT. All those summer workouts, morning pool sessions, mile repeats, and chocolate milks, and we were finally here. This was why we showed up to practice every day at 5PM. This was why we gladly gave up our Saturdays, our Friday nights. The last chance for us to race together. Our chance to prove that we could survive MIT and succeed at cross-country at the same time. For me, a last race as an Engineer. And what a race it was! The gun went off, and we ran. (Im going to forgo the action shots, because lets face it, nobody looks good when theyre racing). In a race as large as nationals, you cant know what your teammates are doing; the field is so large and so clumped together that all you can do is hope to hear snatches of names as spectators cheer. But every person counts; any opponent you pass can make the difference between being on the podium or off. After a fourth place finish at regionals, only two points behind third, we knew this too well. You also cant always know how youve finished, or how your team has done. As runners stream across the finish line, it is enough to try to find your teammates, to gather your exhausted crew and extract yourselves from the chaos that grows around the chute. So when my parents and teammates and coaches found us, excited and saying something about 4th place, I was mostly confused and a little overwhelmed. But then I looked at the scoreboard: The unofficial results! And it was true! Unofficially, we were fourth! Better than last year, when we had been ranked higher, had had higher expectations going in. It took the length of our cooldown for it to sink in to me-we had made the podium! But that wasnt all-as we were sitting inside Wartburgs gym, waiting for awards, one of our coaches came over and told us that after taking out individual places and recalculating, officially, we were third! Again, I didnt quite believe it. But then the announcer was announcing places and suddenly fourth place was called and no MIT. So third it was! The entire team, plus one very large trophy. The freshman runner friends (now all grown up?) celebrate our last race together. My parents! In high school, my dad never missed a meet and my mom volunteered at every home track meet, so it mean a lot for them to come out to my final race. It was also nice because they took home the stuff that wouldnt fit in my suitcase on the way back (like my hardware). But the day wasnt done. Our tireless coaches drove us all the way back to Minneapolis, where we ate dinner at the Mall of America and celebrated a successful close to the season. (Id like to take a moment here to thank Coach Taylor, Coach H, Coach Paterno, Coach Pete, and Coach Kate. Not only did they drive us all around Iowa and put up with our nonsense all weekend, but they worked harder then we did all season (and didnt even get to race!). They are the reason we had such a good season, and perhaps more importantly, stayed sane while aquajogging. (which is saying a lot!)) The girls team went shopping. (what? theres no Nordstrom in the city!) The guys went on the spongebob roller coaster. And then it was back to Boston. Up early again on Sunday morning, we returned to MIT, proud of our race (if not a little tired). Photo credits, in order : Tania 12, Gihan 11, Tania 12, Gihan 11, Gihan 11, Tanias mom, Tania 12, my dad,Tanias mom, Gihan 11,my dad, Tania 12, Joe (CME). (social media and easy photo-sharing FTW).

12 Important Animals of North America

Environmental Factors Paper - 981 Words

Environmental Factors Paper This paper will discuss the five environmental factors that influence global and domestic marketing decisions that organizations must make. The five environmental factors are social, economic, technological, competitive, and regulatory. The social forces of the environment as defined in Marketing, include the demographic characteristics of the population and its values (Kerin Berkowitz, Hartley Rudelius, 2006, p. 74). This includes gender differences, buying patterns, diversity, culture, and attitudes. The Company refers to this factor as corporate citizenship. Corporate citizenship is one of core values and is integral to the companies’ expertise in flight and technology. knows that they have†¦show more content†¦The U.S. Federal Aviation Administration (FAA) writes and enforces all the rules and regulations for aircraft manufactured or operated in the United States. It also operates the U.S. air traffic control (ATC) system. On safety matters, aviation is highly regulated. There are safety standards for airplane products, airline operations, airports, and airline personnel such as pilots and mechanics whose jobs can affect the safety of flight. Airplane manufacturers and airline operato rs typically exceed government standards. On the defense side, regulations come from federal organizations as International Traffic in Arms Regulations (ITAR) and the Federal Acquisition Regulations (FAR) and various others. Is technology good or bad? This question is the root of a continuous debate on whether the effects of technology on society are more positive or negative. Technology has changed the world in so many ways, and certain inventions have made significant impacts on society. One of these inventions is the airplane, and the company has spent a fortune staying ahead of the technological curve. Technical change in a growing business is inevitable. Changes must take place in many chapters of each business in order to preventing it from going under. Through good marketing, organizations can continually change and control elements in this environment. Ethical decisions serve as the primary basis for good corporate governance. Proper marketing ethics emphasize theShow MoreRelatedCoca Cola Environmental Factors Paper1224 Words   |  5 PagesAn organization should always be careful when considering the environmental factors that could possibly affect their marketing both globally and domestically. The Coca-Cola Company and Subsidiaries have many environmental factors that affect their global and domestic marketing decisions. These factors include; global economic interdependence alongside trade practices and agreements, demographics and their importance on top of physical infrastructure, cultural differences, social responsibilitiesRead MoreEnvironmental Factors Paper: a Study of Mcdonalds Corporation1443 Words   |  6 PagesEnvironmental Factors Paper: A Study of McDonalds Corporation Environmental factors have wide-reaching effects across a companys global marketing platform. Many areas, such as economic or social aspects, can be sensitive and must be addressed appropriately for marketing success. McDonalds Corporation is a global company that faces these challenges and issues, some of which will be addressed in this paper. Additionally, the importance of technology and how it impacts McDonalds marketing decisionsRead MoreMKT 421 Week 5 Individual Assignment Environmental Factors Paper1123 Words   |  5 PagesEnvironmental Factors Environmental Factors MKT/421 Marketing Name November 16, 2010 1 Environmental Factors 2 Environmental Factors Environmental Factors can affect businesses and have an impact on marketing decisions. The organization that was chosen for the environmental factors paper was Coca-Cola. This company’s major marketing decisions are impacted by environmental factors. This paper is intended to address the forecasts of high level global and domestic environmentalRead MoreBio X Make Up Work1560 Words   |  7 Pagesnot well understood. The first paper, â€Å"Cis Regulatory Effects on A-to-I RNA Editing in Related Drosophila Species,† compares Adenosine-to-inosine (A-to-I) RNA Editing between two Drosophila species: D. melanogaster and D. sechellia. The primary interest of this study is the regulation of RNA editing and whether this regulation is determined predominantly by cis sequences close to the editing site or more extrinsic trans factors. Both cis sequences and trans factors have been demonstrated to affectRead MoreQuestions On Sustainability Of Real Estate1422 Words   |  6 PagesIntroduction This report focuses on the review and discussion of three scholarly papers related to sustainability in real estate. A section will be dedicated to each of the three papers. Within these sections, the nature of the work and its key findings will be reviewed along with the author’s motivation and intentions. Additionally, different types and sources of data that is used in the papers will be examined and analyzed in order to enhance the topics discussed. The final section of this reportRead MoreEnvironmental Scan1153 Words   |  5 PagesMGT 498 Environmental Scan Paper MGT/498 Environmental Scan Paper Environmental scans play a crucial role in the strategic planning process by helping organizations take a look at their competitive advantages and identify ways to sustain the advantages. Wheelen and Hunger (2010) describes environmental scanning as â€Å"the monitoring, evaluation, and dissemination of information from external and internal environmentsRead MoreEnvironmental Scan Paper1272 Words   |  6 PagesEnvironmental Scan Paper There are internal and external elements that help a corporation determine their future. Environmental scanning monitors, evaluates, and disseminates the information from both the internal and external environments within the corporation. The internal and external elements are strategic factors that determine the corporation’s future. Environmental scanning can be conducted through a simple SWOT analysisRead MoreHow Do Trade, Investment Flows Affect Environmental Sustainability? Evidence From Panel Data Essay1105 Words   |  5 PagesHow do trade, Investment flows affect environmental sustainability? Evidence from Panel data in Southeast Asia Abstract The inter-linkage between investment flows and trade and environmental sustainability is an extensively researched area. It has been marked that FDI is increasingly being directed to the developing countries in recent period, whose export basket is generally more intensive in primary products and manufacturing products. In this background, the recent study contributes to the existingRead MoreThe International Study Of Childhood Obesity, Lifestyle And The Environment ( Isole ) Design And Methods1470 Words   |  6 PagesThere are three research papers on which this work will be predicated upon. They are; 1. Paper 1: Recognition and management of overweight and obese children: A questionnaire survey of general practitioners and parents in England (Journal of Paediatrics and Child Health). 2. Paper 2: Features of the built environment related to the Physical activity friendliness and Children’s Obesity and other risk factors (Public Health Nursing). 3. Paper 3: The International Study of Childhood Obesity, LifestyleRead MoreEnvironmental Justice And Gentrification Of The United States And Its Population Pride Themselves On Setting The Trend1381 Words   |  6 Pages Final Paper Environmental Justice and Gentrification The United States and its population pride themselves on setting the trend. Whether it’s the newest clothing line, the best recording artist, or a slightly more important issue, Americans pride themselves in setting the pace on issues for the rest of the world. One issue that has caught our attention is the term â€Å"urban greening†. This is defined as taking an urban area and making it more â€Å"green† by adding parks, building green roofs on apartments

Management, Personal and Study Skills Free Essays

In this section of my assessment for the Study Skills assignment, I will be producing a report, which will outline the contribution that I made within my group in our presentation on ‘Northern Ireland’. The presentation was conducted by a small group from the Business and Management Studies class in Lancaster. The group consisted of five individuals, namely Chris Gallagher, Peter Stephenson, David Long, Arif Patel and myself. We will write a custom essay sample on Management, Personal and Study Skills or any similar topic only for you Order Now The purpose of the presentation was to inform the audience of the main aims and objectives of the assignment, and educate the audience of the main findings of the written report and country analysis. Furthermore, the group believed that it would be beneficial to enlighten the audience of the conclusions and recommendations that we had made which related to the findings. Within the group, I contributed a great deal in the planning and writing up of the assignment. Our group communicated amongst itself both efficiently and effectively. Although we gathered on only the one occasion outside academic hours, this was extremely constructive as we were able to discuss and arrange the nine distinct sections of the presentation. The reason we were unable to meet up more often is due to the fact that I did not have any contact numbers for the people in my group. This is because I was initially intending to work with a group from the Business and Management Studies class in Carlisle, which is where I have been studying the module. However, due to certain circumstances this was altered. Despite such impediments, the presentation was successfully completed before the deadline date to the anticipated standard. In order to bring the presentation together, we firstly completed the written section of the assessment, in which we again as a group were required to conduct a country analysis of Northern Ireland, which would cover all the aspects mentioned subsequently in this report. Accordingly, we condensed the information contained in our assignments, and utilised the most important points in order to produce an effective presentation. Whilst completing the written section of the assignment, we met up on more than one occasion to complete the assessment. As a result of the meetings, we decided to make a PowerPoint presentation of our chosen island, which was Northern Ireland and the various applicable issues. Our presentation was required to last for no longer than fifteen minutes and no less than ten minutes. Upon completion of the presentation, it was apparent that most of our presentation ran according to plan and the learning outcomes that were outlined before the presentation had been met. During the group discussions, we chose to write about different aspects of Northern Ireland, namely the aims, the economic overview, the political stability and the primary export strengths. In the group, my role was to explicate the social issues in Northern Ireland. The presentation also included information on tourism, the transport infrastructure, the conclusion of our presentation and finally the recommendations we made on Northern Ireland. My role within the group of the nine sections comprised of the social issues and a point from the conclusion section in the presentation. Firstly, I decided to research the various social issues of Northern Ireland, and aimed to expand on a number of these issues. I investigated these certain aspects by using different types of research. The group decided on using OHT’s and Microsoft PowerPoint in order to communicate effectively with our audience. Therefore, the research, which I collected on the social issues of Northern Ireland, which was my role in the presentation, was put on both OHT’s and Microsoft PowerPoint. My role in the work of the group for the presentation involved introducing the facts of the social issues of Northern Ireland and writing up on one of the four points in the conclusion, which was linked to the social issues. I explained the four main social issues to the class and why these points exist. (See Appendix 1). The remaining sections were completed by the other members my group. We all contributed to reading the conclusion and recommendations’ slides in which we alternatively talked through all the points. Firstly, Craig Gallagher talked the class through the first two slides on the aims of Northern Ireland and the economic overview of the country, whereas David Long covered the political stability and the tourism sections. Peter Stephenson covered the section on the primary export strengths, leaving the transport infrastructure to Arif Patel. These members of the group also took certain points and went into detail when discussing their sections for the presentation. At the end of our presentation, we held a plenary session in which our audience were asked if they would like to ask any questions which could be answered on the different aspects which we discussed in our presentation. This demonstrated the audience’s understanding of the information presented. The structure of our presentation included the clear use of Microsoft PowerPoint and the use of OHT’s. this enabled the group to communicate more effectively with the audience, as it allowed visual aids to correspond with the verbal communication. The whole presentation was conducted around the use of the above in order for the audience to understand thoroughly the purpose of the presentation. I believe that my group successfully informed the class on our topic of Northern Ireland which we had chosen as a group with a mutual agreement. We chose our country from the list that had been given to us. As we held a plenary session towards the end of our presentation in which the class could ask our group questions, this allowed everybody a chance to express their views. All the discussions contained correct answers by the audience, which illustrated that we had covered all the topics effectively and resourcefully. If I was to carry out this particular, or any other, presentation in the future, I would ensure that my PowerPoint document is working well because in our presentation there was a problem with the PowerPoint, due to a technical hitch. This was the only aspect of the presentation which did not go according to plan. As a result of this, we were required to read off our print outs, which we had created in case of such circumstances. Another thing that I would change in the future is to be more organised and time efficient. This is due to the fact that we had to rush to put the presentation together, as we had all worked on our different sections of the assignment individually on our own. Therefore, when we met up we were required to organise our final piece, prior to the presentation. In addition, I feel that getting to know the members of a group and building a relationship between each other is essential, as it can cause some awkwardness when you do not know all the members. However, I was fortunate, as I knew some of them from my Economics class. Even though I did not know all of the members, we worked well together as a group and did not face any issues, which would have made it difficult for us to work as a team. To conclude this report, I feel that we were very successful in informing and motivating the class on our subject. The reason for this is that the class met the objectives, which we outlined at the beginning of our presentation and the met the criteria set in order to pass this section of the assignment. How to cite Management, Personal and Study Skills, Papers

Lathe Machine Lab free essay sample

Beside that ,it can be used to measure the length of the object, which specific size is 100mm and 25mm in diameter. 3. 2) Lathe Machine A lathe is a machine tool which rotates the workpiece on its axis to perform various operations such as cutting, sanding, knurling, drilling, or deformation with tools that are applied to the workpiece to create an object which has symmetry about an axis of rotation. Lathes are used in woodturning, metalworking, metal spinning, and glassworking. Lathes can be used to shape pottery, the best-known design being the potters wheel. Most suitably equipped metalworking lathes can also be used to produce most solids of revolution, plane surfaces and screw threads or helices. Ornamental lathes can produce three-dimensional solids of incredible complexity. The material can be held in place by either one or two centers, at least one of which can be moved horizontally to accommodate varying material lengths. Other workholding methods include clamping the work about the axis of rotation using a chuck or collet, or to a faceplate, using clamps or dogs. Group 3 | Weekly Report | Lathe P a g e |1 WEEKLY REPORT – LATHE MANUFACTURING LAB (MEFB 121) GROUP 3 REV NO : 000 DATE : 11 NOVEMBER 2011 Below are the list of parts and functions in lathe machine. No 1 Components Bed Functions Provides a heavy rigid frame on which all the main components are mounted. Inner and outer guide rails that are precision machined parallel to assure accuracy of movement. mounted in a fixed position on the inner ways, usually at the left end. Using a chuck, it rotates the work. inside the headstock, providing multiple speeds with a geometric ratio by moving levers. Hole through the headstock to which bar stock can be fed, which allows shafts that are up to 2 times the length between lathe centers to be worked on one end at a time to clamp part being machined and allows the mounting of difficult workpieces that are not round, square or triangular. Fits on the inner ways of the bed and can slide towards any position the headstock to fit the length of the work piece. An optional taper turning attachment would be mounted to it. Moves on the outer ways. Used for mounting and moving most the cutting tools Mounted on the traverse slide of the carriage, and uses a hand wheel to feed tools into the workpiece. To mount tool holders in which the cutting bits are clamped Mounted to the cross slide, it pivots around the tool post Attached to the front of the carriage, it has the mechanism and controls for moving the carriage and cross slide. For cutting threads 2 Ways 3 Headstock 4 Gearbox 5 Spindle 6 Chuck 7 Tailstock 8 9 Carriage Cross Slide 10 11 12 Tool Post Compound Rest Apron 13 Lead Screw Group 3 | Weekly Report | Lathe P a g e |2 WEEKLY REPORT – LATHE MANUFACTURING LAB (MEFB 121) GROUP 3 REV NO : 000 DATE : 11 NOVEMBER 2011 4. PROCEDURE Procedure for this purpose can be classified into 3 different topics; Work procedure, Operation and Safety precautions which each of those carried elements of different perspective but act under the same objective. 4. 1. Work Procedure I. Morning briefing by the technician; Mr. Shamsul on all aspect of job scope II. Proper safety attire were wore first III. Our group were given one workpiece for this particular activity. Using vernier calliper, the dimensions obtained and shown as per below : 100mm O25 Figure 3 – Initial workpiece dimension IV. V. The workpiece later being lock and was placed firmly in the spindle. The cutting tool was aligned to the dead center. The machine was turned on. The carriage was moved to the left by rotating the hand wheel until the tip of the cutting tool touches the edge of the metal cylinder. Cutting tool touch the edges 0. 5mm Group 3 | Weekly Report | Lathe P a g e |3 WEEKLY REPORT – LATHE MANUFACTURING LAB (MEFB 121) GROUP 3 REV NO : 000 DATE : 11 NOVEMBER 2011 VI. VII. VIII. IX. For safety reason, the workpiece were mounted with 0. 5mm per run(safe operation). The machine then were run by cutting the whole workpiece for 20mm diamater. This process need to be done two times which one on the left hand side and the right hand side. The carriage need to be push to the left slowly. For 20mm diameter cut,we need to repeat 4 times because to follow the safe operation procedure. Step 6 below were repeated for cutting the 15mm and 10 mm diameter. The final workpiece is as per below: O10 O15 O20 Figure 4- the final workpiece. 4. 3. Operation I. II. To perform lathe activity, the workpiece need to be lock and secure in the spindle at first. Then the lever that control the x-axis of the lathe machine is adjust and set to 0. This step is essential so that the operator keep tracks of the depth between the initial and the final workpiece. For safety purporse, the lathe machine only can cut down the workpiece for 0. 5mm per run. Apart from that,coolant switch also are turned on to reduce the friction between the cutter n workpiece. After all, the main switch is turned on and the cutter start to rotate itself. The lever on the x-axis need to be move to the left and the process of lathe begin. Push the lever slowly to the end. Lathe the workpiece until the end and after the process done,turn off the machine. III. IV. V. Group 3 | Weekly Report | Lathe P a g e |4 WEEKLY REPORT – LATHE MANUFACTURING LAB (MEFB 121) GROUP 3 REV NO : 000 DATE : 11 NOVEMBER 2011 4. 2. Safety Precautions I. II. III. IV. V. VI. VII. Before setting up a job, be sure that the workpiece, the table, the taper in the spindle, and arbor or cutter shank, are all clean and free from chips, nicks, or burrs. Keep lathe cutters sharp at all times. Do not change feeds or speeds while the lathe machine is in operation. Always turn on the coolant while doing the lathe process. This will reduce the total friction between the cuters and the workpiece. Never run a the lathe machine without the workpiece. When using clamps to secure the workpieces, be sure that they are tight and that the workpiece is held so that it will not spring or vibrate while it is being cut. Keep chips away from the workpiece; brush them out of the way by any convenient means, but do not do so by hand or with waste. NEVER remove chips with your bare hands. Use a stick or brush, and always stop the machine. Should it become necessary to operate the lathe while the ship is underway, be especially safety conscious. (Machines should be operated ONLY in relatively calm seas. ) VIII. 5. DISCUSSION From the activity that we done, we can sum up on several process that related to lathe machine. Points below explain the process of the lathe machine works on the workpiece. I. Turning A right-hand turning tool bit is shaped to be used from right to left. The cutting edge is on the left side of the tool bit and the face slopes down away from the cutting edge. The left side and end of the tool bit are ground with sufficient clearance to permit the cutting edge to bear upon the work piece without the heel rubbing on the work. The right-hand turning tool bit is ideal for taking light roughing cuts as well as general all-around machining. A left-hand turning tool bit is the just like right-hand turning tool bit, except that it’s the opposite. This tool bit is designed to cut when fed from left to right. The round-nose turning tool bit is very versatile and can be used to turn in either direction for roughing and finishing cuts. No side rake angle is ground into the top face when used to cut in either direction, but a small back rake angle may be needed for chip removal. The nose radius is usually ground in the shape of a half-circle with a diameter of about 1/32 inch. The right-hand facing tool bit is intended for facing on right-hand side shoulders and the right end of a work piece. The cutting edge is on the left-hand side of the bit, and the nose is ground very sharp for machining into a square corner. The direction of feed for this tool bit should be away from the center axis of the work, not going into the center axis. A left-hand facing tool bit is the opposite of the right-hand facing tool bit and is intend to machine and face the left sides of shoulders. Example of the process as shown in figure 5. Group 3 | Weekly Report | Lathe P a g e |5 WEEKLY REPORT – LATHE MANUFACTURING LAB (MEFB 121) GROUP 3 REV NO : 000 DATE : 11 NOVEMBER 2011 Figure 5- The turning of the lathe machine cutter. II. Feed speed and depth of cut Cutting speed is defined as the speed at which the work moves with respect to the tool. Feed rate is defined as the distance the tool travels during one revolution of the part. The finish is determined by the cutting speed and feed, power requirements, and material removal rate. The primary factor in choosing feed and speed is the material to be cut. However, one should also consider material of the tool, rigidity of the work piece, size and condition of the lathe, and depth of cut. To calculate the proper spindle speed, divide the desired cutting speed by the circumference of the work. In considering depth of cut, its important to remember that for each thousandth depth of cut, the work diameter is reduced by two thousandth. Some calculation can be done to define the feed speed but there a few missing variable like the rotation per minute (RPM) of the lathe machine use. To calculate spindle speed required, N=CS(1000) ? d N= Spindle speed( RPM) CS= Cutting speed of the metal(m/mm) d=diameter of the workpiece Group 3 | Weekly Report | Lathe P a g e |6 WEEKLY REPORT – LATHE MANUFACTURING LAB (MEFB 121) GROUP 3 REV NO : 000 DATE : 11 NOVEMBER 2011 III. Industrial application The lathe is one of the engineers most valuable tools. Coupled with a milling machine or milling head (Tri-axis lathe) there is nothing that cannot be produced from virtually any kind of material. A lathe can be used to a) b) c) d) e) f) g) h) i) j) Turn an ornate wooden spindle Skim a cylinder head or other gasket-face Put a screw-thread on a piece of metal bar Drill a hole of almost any size in almost any material Machine an intricate valve, collet or gudgeon Put a screw-thread inside a hole (Tap the hole) Produce a complex component such as a cog-wheel, crown wheel or pinion Re-bore the cylinder of an engine Create irregular / offset flanged components of infinite complexity.

Federal Regulation of Sewage essays

Federal Regulation of Sewage essays Federal Regulation of Municipal Solid Waste Landfills Municipal solid waste, MSW, is a term used to refer to a wide variety of waste sources. Generally, solid waste refers to all materials or substances discarded or rejected as being spent, useless or in excess to the owners at the time of such discard or rejection. Waste includes but is not limited to: garbage; refuse; industrial and commercial waste; sludge from air or water control facilities; rubbish; ashes; contained gaseous material; incinerator residue; demolition and construction debris; discarded automobiles and offal. The Environmental Protection Agency, or EPA, chooses to define this term slightly differently depending on the context in which it is being used. In the MSW Settlement Proposal, MSW is defined as "solid waste that is generated primarily by households, but that may include some contribution of wastes from commercial, institutional and industrial sources as well." Solid waste is generally anything discarded with several specific exceptions. Most solid waste, when it goes to a landfill, goes to a Municipal Solid Waste Landfill, MSWLF. A municipal solid waste landfill is defined by law as a discrete area of land or an excavation that receives household waste, and that is not a land application unit, surface impoundment, injection well, or waste pile. Household waste includes any solid waste, including garbage, trash, and septic tank waste, derived from houses, apartments, hotels, motels, campgrounds, and picnic grounds. An MSWLF unit also may receive other types of wastes as defined under Subtitle D of the Resource Conservation and Recovery Act, such as commercial solid waste, non-hazardous sludge, small quantity generator waste and industrial solid waste. Also allowed in municipal solid waste landfills are industrial and commercial non-hazardous process wastes, construction and demolition debris, municipal sludge, and agricultural wastes. In addition, these lan...

Babylonia and the Law Code of Hammurabi

Babylonia and the Law Code of Hammurabi Babylonia (roughly, modern southern Iraq) is the name of an ancient Mesopotamian empire known for its math and astronomy, architecture, literature, cuneiform tablets, laws and administration, and beauty, as well as excess and evil of Biblical proportions. Control of Sumer-Akkad Since the area of Mesopotamia near where the Tigris and Euphrates rivers emptied into the Persian Gulf had two dominant groups, the Sumerians, and Akkadians, it its to as Sumer-Akkad. As part of an almost endless pattern, other people kept trying to take control of the land, mineral resources, and trade routes. Eventually, they succeeded. Semitic Amorites from the Arabian Peninsula gained control over most of Mesopotamia by about 1900 B.C. They centralized their monarchical government over the city-states just north of Sumer, in Babylon, formerly Akkad (Agade). The three centuries of their domination is known as the Old Babylonian period. The Babylonian King-God Babylonians believed the king held power because of the gods; moreover, they thought their king was a god. To maximize his power and control, a bureaucracy and centralized government were established along with the inevitable adjuncts, taxation, and involuntary military service. Divine Laws The Sumerians already had laws, but they were administered jointly by individuals and the state. With a divine monarch came divinely inspired laws, violation of which was an offense to the state as well as the gods. The Babylonian king (1728-1686 B.C.) Hammurabi codified the laws in which (as distinct from the Sumerian) the state could prosecute on its own behalf. The Code of Hammurabi is famous for demanding punishment to fit the crime (the lex talionis, or an eye for an eye) with different treatment for each social class. The Code is thought to be Sumerian in spirit but with a Babylonian inspired harshness. The Babylonian Empire and Religion Hammurabi also united the Assyrians to the north and the Akkadians and Sumerians to the south. Trade with Anatolia, Syria, and Palestine spread Babylonian influence further. He further consolidated his Mesopotamian empire by building a network of roads and a postal system. In religion, there wasnt much change from Sumer/Akkad to Babylonia. Hammurabi added a Babylonian Marduk, as chief god, to the Sumerian pantheon. The Epic of Gilgamesh is a Babylonian compilation of Sumerian tales about a legendary king of the city-state of Uruk, with a flood story. When, in the reign of Hammurabis son, the horse-back invaders known as the Kassites, made incursions into Babylonian territory, the Babylonians thought it punishment from the gods, but they managed to recover and stayed in (limited) power until the beginning of the 16th century B.C. when the Hittites sacked Babylon, only to withdraw later because the city was too distant from their own capital. Eventually, the Assyrians suppressed them, but even that was not the end of the Babylonians for they rose again in the Chaldean (or Neo-Babylonian) era from 612-539 made famous by their great king, Nebuchadnezzar.

Fair Labor Standards Essay Example | Topics and Well Written Essays - 250 words

Fair Labor Standards - Essay Example This implies that the non-exempt personnel must work for over 40 hours a week to qualify for the overtime pay in which the employer is mandated to offer three quarters times their normal wage rate. It is also apparent that the exempt employees in the white-collar job category cannot benefit from the pay. The proposed changes to the FLSA since 1938 is that it allowed the employment of 16-year-old children in the agricultural sectors, but still prohibited those under that age. This is meant to defend the educational prospects of minors and rule out their employment in jobs deemed hazardous and injurious to their health. These laws differ from the 1938 regulations because it specifies the minimum amount that workers in the private sector, federal or local authorities should receive (Whittaker, 2002). I think these changes benefit both employers and employees because it prevents exploitation of workers by unscrupulous managers who underpay their workers. Similarly, it also benefits the managers since it reduces chances of industrial unrests from workers who feel mistreated or overworked. The controversy associated with these modifications is that the exempt workers feel discriminated against by the legislators and labor officials. For instance, the union’s objections are that the government should treat all workers equally regarding the overtime allowances and the proposed new rates for the working hours since this could deny the workers their established privileges (Whittaker,

HEALTHY PEOPLE 2020 OBJECTIVE EH-12 Increase recycling of municipal Research Paper

HEALTHY PEOPLE 2020 OBJECTIVE EH-12 Increase recycling of municipal solid waste - Research Paper Example Incidentally, the increasing number of environmental factors has contributed to adverse health such as exposure to harmful substances in the soil, air, water, food, etc. (Scott, 2007). Human activities such as increasing development, activities and use of unsafe chemicals as well as man-made and natural disasters are responsible for increasing environmental pollution (Spilsbury, 2014). Environmental pollution has adverse health effects on everybody. Nurses have a role to play in promoting health environment through incorporating information of the environment in their activities. Recycling of waste and water and energy conservation should be introduced to school going children to increase awareness of environmental health. The increasing rate of waste generation calls for regular measures to reduce the generation and accumulation of such waste. Some of these measures include recycling and conserving water and energy. More than 3, 000 people die every year because of waterborne diseases. Also, 1 out of 6 Americans fall sick because of eating contaminated foods. According to Allender et al., (2013, 286), â€Å"Americans produced about 254 million tons of waste in 2013 and only 87 million tons (34.3) of the waste was recycled.† This was equivalent to 1.51 pounds recycled out of 4.40 pounds of individual waste per day. Through recycling Americans reduced a total of 186 million metric tons of carbon dioxide emission into the air in 2013. The environmental health objectives of Healthy People 2020 concentrate on six themes that highlight components of environmental health. These includes global environmental health, the quality of outdoor air, homes and communities, quality of surface and underground water quality and infrastructure and development. Water is very essential to human life because about 60% of human body is composed of water. By 2018, about 1.8 billion will people will be living in regions with water scarcity. The

History Of What Is Crime Criminology Essay

History Of What Is Crime Criminology Essay What is crime. Many people when asked this question assume its a common sense answer, something that is seemed wrong or illegal and results in punishment of some form. However there is no simple answer to this question. According to the Oxford dictionary crime is defined as an action or omission which constitutes an offence and is punishable by law, therefore in its simplest form crime is a punishable act of which breaks the rules of the law. However the concept of crime is surrounded by constantly changing ideas and perceptions of what constitutes criminal behaviour. Crime is always socially defined leading to competing views and extensive debate. In this essay I will be focusing on defining crime in terms of legal definitions and also defining crimes in terms of sociological definitions, which can be argued to be the main to focuses when attempting to answer this question. Blackburn (1993) defines crime as acts attracting legal punishment, [they] are offences against the community. Crimes result with consequences that are damaging in some way to the community or one of more people within it. These consequences can range from trivial to severe. Blackburn recognizes that crimes are, in theory, generally disapproved by the entire of society as they often involve violating moral rules held by those members of society, he also notes some of the difficulties and limitations of this way of defining crime. For example, personal opinion will impact the definition of crime. Not all crimes are disapproved by all people, e.g. speeding. This is a criminal act but does not have a wide-spread social disapproval. Secondly, whilst the vast majority of criminal acts such as murder violate societies moral rules, acts that are part of a bigger picture do not such as possession of a banned drug for personal use, these crimes can be termed victimless crimes. These crimes ar e illegal in the UK but there is not a clear understanding of which, if any, moral codes they violate. This leads me on to the question of whether crime, although its primarily defined by the law, is it not also based on social and cultural factors (social and cultural norms and values)? In our society it is the legal system that defines which acts are criminal and which are not. A crime cannot be committed unless the act violates the law. In the UK the legal system follows a tradition of a crime has not been committed unless there is a guilty act, an act that is voluntarily carried out with a guilty mind and an intention to commit the act. Therefore in theory if the act has not been intentionally chosen then it is not a crime. It can be argued that there is an assumption that criminal acts are systematically arranged in law; the law has been created, policed and enforced by the UK state. Crime in terms of the legal system is acts which break the law of the land, as demonstrated by the Oxford English Dictionary definition. The legal definition of crime is a very weighted argument, however many also argue that in order to define crime we rely on existing social and cultural norms which are accepted in society. The definition of crime is dependent on it as it effects our own interpretation of what crime is. Social and cultural factors are constantly evolving and changing. They are not static and this therefore makes them susceptible to changes which inevitably affect the definition of crime. For example, the 1604 Witchcraft Act. This law stated that those who had been accused of witchcraft were burnt at the stake if the cases were petty treason, however with the majority of cases resulting in hanging or a year in prison if the individual committed only a minor offence. This act was repealed in 1951 in Britain. However, a clear example of how social and cultural factors impact the law is the fact that in Africa, the witchcraft ban in Zimbabwe only ended in 2006. Therefore, on the one hand crimes are acts that break the law, and on the other, they are acts which can offend against a set of norms like a moral code, this is also known as the normative definition of crime. Cultures change and the political environment changes with that which means societies may criminalise or decriminalise certain behaviours. This will also have an impact on crime rates which will then also inevitably influence the general public opinion of crime. In the UK rape is a definite Invasion of our social norms, values and rights as an individual. Rape is not accepted in any case. However in South Africa a survey by CIET found that 60% of both boys and girls, aged 10 to 19 years old, thought it was not violent to force sex upon someone they knew, while around 11% of boys and 4% of girls admitted to forcing someone else to have sex with them. The study also found that 12.7% of the students believed in the virgin cleansing myth (an HIV/AIDS positive male believing that having sex with a virgin girl will cure him of his disease). In the culture these children have been socialised into, these are their own social norms and opinions that are accepted in their society, in the UK and in fact in the majority of other countries and cultures around the world this behaviour would be seen as illegal, horrific and completely wrong. A final impact on our norms and behaviour is religious traditions that may promote these norms. The may, in turn clash or fit with perceived interests of a state. Many socially accepted or even imposed religious morality has influences on issues that may otherwise only have concerned each individuals conscience. There are many activities that are sometimes criminalized on religious grounds, for example alcohol-consumption and abortion. However although these may be beliefs of certain religious followers, in societies where religion has less power and impact on the legal system both these acts are legal and widely accepted. So what a crime is depends on whether you view it from a legal or a normative perspective. There is no simple, fixed, objective definition of crime it is not a simple matter. Crimes are defined by societies and by culture and the time that we live in. For example, it would not have been a crime one hundred years ago to not pay your TV licence in the UK, because there was no TV. In Victorian pharmacies, cocaine was sold, but today this would be considered illegal in most countries. So what we view as a crime depends on how crime is viewed, time, particular society and the culture. Society is constantly evolving and changing along with social values, beliefs and norms. This process will inevitably have an impact on what constitutes a crime and how crime is in general defined. Although there are many problems with defining crime, this shouldnt overshadow the fact that the purpose of the law to reinforce the punishment of crime is clear, it is there to protect the public, this could in i tself contribute to defining crime.

Welding with Children

Seth Bohlander English 1102 Mrs. Hammonds 10 October 2010 Bruton’s Change â€Å"Welding with Children† is a short story that illustrates thematic ideas from beginning to end. Throughout the story, Bruton, an older redheaded man with papery skin, shows that his parenting skills have suffered, and he is embarrassed with how he raised his four daughters in the past. With his daughters now grown, the reputation of their upbringing still haunts him. Examples like Bruton’s car being referred to as the â€Å"bastardmobile† show just what type of reputation he is dealing with.Though as the story progresses, Bruton shows change. Through a series of epiphanies or awakenings, he realizes he can’t undo his previous mistakes, but believes he can redeem himself by parenting his grandchildren the correct way, all while welding with children. From the beginning of the story, Bruton shows his carefree attitude on things that are considered important to most people. After dropping out of college in his first semester, he states, â€Å" I may have flunked out that semester, but I got my money’s worth learning about people that don’t have hearts no bigger than birds shot† (Gautreaux 200).His attitude shows he has no drive to fix problems. In an interesting way, he sees some sort of accomplishment from his failure. This attitude is similar to how he raised his children. He knows he messed up, but feels he can do nothing but live with his mistakes. Bruton continues to show his stagnant attitude throughout the story until experiencing his first epiphany. While driving home, one of the grandchildren Freddy says something that indicates to be a curse word. When asked where he heard words like those, Freddy says he heard it on a late night comedy program.Bruton is enlightened, and thinks back on his four daughters. â€Å"None of them has any religion to speak of. The girls grew up watching cable and videos every night, and thatâ⠂¬â„¢s where they got their view of the world, and that’s why four dirty blondes . . . thought they lived in a Hollywood soap opera (Gautreaux 202). This is suggests that television is to blame. Seeing that history does repeat itself, Bruton takes advantage of the situation and sits the kids down and begins teaching them about the bible.The sense of urgency shows this to be an important aspect of parenting that he forgot. Before being enlightened, Bruton believed that the reason his four daughters turned out the way they did, was solely his wife’s fault. Since she was gone all the time, he found it easy to point the finger to her. He never felt accountable, but after the first awakening, Bruton takes full responsibility for his actions and signs of change. With the weight of responsibility on his back, Bruton turns to the only people he knows who can help him. The Tree of Knowledge†, a group of men whom have already insulted Bruton, give him three helpful suggest ions. They tell him to clean his yard, join the Methodist church, and keep the children with him as much as possible. At first, the suggestions appear to be patronizing, but somehow Bruton sees a positive message through their comments. Turing to these men for advice shows that Bruton is sympathetic. After the vicious comments that were made to Bruton’s daughters, he shows signs of forgiveness and remorse to go to these men for help.In conclusion, Bruton sends a message that is simple and bold. Embracing opportunity enables the probability of change. â€Å"Time for a change† (Gautreaux 210). Being assigned the duty to babysit his grandchildren appeared to be a simple task, but seeing the opportunity to fix a problem that has been passed down through two generations makes Bruton a heroic and dynamic character. Work Cited Gautreaux, Tim. â€Å"Welding with Children. † Perrines’s Literature: Structure, Sound, and Sense, 10th ed. Thomas R. Arp and Greg Johnso n. Boston: Wadsworth, 2009. 198-211. Print.

Why People Arent Discussing College Application Essay Samples Pdf and What You Need to be Doing Right Now About It

Why People Aren't Discussing College Application Essay Samples Pdf and What You Need to be Doing Right Now About It The 30-Second Trick for College Application Essay Samples Pdf It's perhaps not possible to locate a person who'd argue against freedom, and that means you would want to discover an unusual angle from which to approach the topic. Colleges are searching for a feeling of maturity and introspectionpinpoint the transformation and demonstrate your private growth. To do this, you should brainstorm an adequate subject which expresses your nature and your best accomplishments. While my parents may not understand the worth of formal education, I know it's vital for my future. Facts, Fiction and College Application Essay Samples Pdf You may also acquire several discounts on our site which will help you to save some more money for future orders or anything you want to spend them on. Review cnet other web websites or university has turned into a rough draft. You may also fin d a lot of successful sample essays online. On our site, you can acquire the ideal scholarship application essay in a couple of clicks. When you purchase an essay from us, you're guaranteed to relish individual approach because essay help offered by our writers is always customized depending on your requirements. The single most essential part of your essay preparation might be simply making certain you truly understand the question or essay prompt. A good college essay introduction is essential to making your essay stand out so there's a good deal of pressure to receive it right. Before you even begin writing the content of your college essay, there are a number of essay writing basic guide that you always need to bear in mind. Choosing online essay writers isn't a nightmare anymore. To submit an application for RU, you should hand in an essay. Following your nomination, you're required to forward an essay. Before you commence writing your college essay, you might want to see the essay examplesA that we've listed for you, so you may have more idea on what things to put in the college essay which you will create. Learn precisely what the needs of the prompt are. Your application essay is able to help you stick out from the remainder of the candidates and get noticed by the admission board. You must show the admission committee what makes you stick out from the other applicants. Even in the event the deadline is truly tight, feel free to get hold of our managers. Becoming able to compose an essay is an essential part of any students education. Essays are an essential component in the college application procedure. Writing the college application essay can be among the most daunting sections of app lying to college. There are many different college application essay suggestions to help you prepare a superior paper. The application essay is a typical portion of the university and college admissions process. What's more, there's an allowance to use the exact same funny approach utilized by the college. If you are searching for a quick college application essay help, you're at the perfect location. The 30-Second Trick for College Application Essay Samples Pdf If you're going to get in the college of your dreams, you ought to consider how to compose an application essay that stands out from the crowd. As a way to be successful from the start, students will need to begin with sufficient reading and writing skills. A self introduction essay is in the majority of cases written utilizing the very first person viewpoint. Our essay writing service is made for individuals that are dreaming of becoming the cap of the college and have an urge to receive only substantial marks and praises of their tea chers. The essay that's full of bad puns or off-color jokes will often wind up in the rejection pile. Utilize your essay to prove that you're thoughtful and mature, your personality has depth. Also, humor isn't a replacement for substance. Excessive humor can be disastrous particularly when it is misapplied. There's indeed a good similarity between a college application and an amazing story. The way you start your application essay is critical to how well it's going to be received. Sample of the way to compose an essay outline to show you just how to compose an essay outline here is a good example of the format. The next step is to study many structures and formats so that you are able to have the ability to apply the most appropriate one for your essay. Top College Application Essay Samples Pdf Secrets Writing a college application essay can be hard for you in the event you don't follow proper guidelines. Thus, it's better that you ask for an experienced application essay help if you need to accomplish the greatest results. You might see college essay templates on the internet that offer guidelines about how to structure your essay and what things to say in each individual paragraph. Essentially, college application essay format must tackle a topic. Details of College Application Essay Samples Pdf A seasoned professional will make an error-free assignment right away and can help you boost your grades. You are able to use our samples and ideas to compose an ideal work or ask our writers for additional assistance. Whenever you opt to ask us for skilled guidance, don't hesitate to speak to our support managers. Choosing our service, you are going to see that studying can be simple if you gain from the help of competent experts.

Getting a Teacher Certificate

As the TESOL teaching profession becomes more and more competitive, finding a good teaching job requires higher qualifications. In Europe, the TESOL teaching certificate is the base qualification. There are a number of different names for this teaching certificate including the TESL teaching certificate and TEFL teaching certificate. After that, teachers who are committed to the profession will usually go on to take the TESOL diploma. The TESOL Diploma is a full years course and is currently highly valued in Europe.    An Overview This main purpose of this diploma (besides, lets be honest, improving career qualifications) is to give the TESOL teacher a broad overview of the principal approaches to teaching and learning English. The course serves to raise the teachers consciousness as to what learning processes are taking place during  language acquisition and instruction. The basis is on an underlying teaching philosophy of Principled Eclecticism. In other words, no one method is taught as being correct. An inclusive approach is taken, giving each school of thought its due, while also examining its possible shortcomings. The objective of the diploma is to give the TESOL teacher the necessary tools to evaluate and apply different teaching methods to meet each students needs. Taking the Course The distance learning method has both its positive and negative side. There is a massive amount of information to get through and it takes quite a bit of self-discipline to complete the coursework effectively. Certain areas of study also seem to play a larger role than others. Thus, phonetics and phonology play a leading role in the makeup of the course (30% of modules and  ¼ of the exam), while other, more practical subjects such as reading and writing, play a relatively minor role. In general, the emphasis is on teaching and learning theory and not necessarily on the application of specific instruction methods. However, the practical part of the diploma does focus very specifically on teaching theory. Logistically, the support and help from Sheffield Hallam and the course directors at English Worldwide were excellent. The final intensive course of five days was essential for the successful completion of the course. This session was in many ways the most satisfying part of the course and served to unify all the various schools of thought studied, as well as providing practical exam writing practice. Advice Self-discipline and good pacing throughout the entire academic year are of absolute importance in order to deal with all the material presented.As the exam itself concentrates not on single areas of instruction, but rather to global issues, relate parts to the whole on a continuing basis.Get some kind of holiday break in before the final intensive week and exam preparation.   Other Experiences The following other articles and accounts of studying for various teaching certifications. A review of the i-to-i Online Tefl CertificateThe British Councils 404 TEFL Qualifications Guide